The physical and chemical properties and application of molybdenum disulfide MoS2

Molybdenum disulfide MoS2 friction modifier overview

Molybdenum disulfide, the main component of molybdenite, a lead-gray to black solid powder, with a slippery touch, odorless, belongs to the hexagonal or orthorhombic system, similar to graphite, with metallic luster; chemical formula MoS2, melting point 1185°C , Density 4.80g/cm3 (14℃), Mohs hardness 1.0～1.5. It starts to decompose at 1370℃ and decomposes into metallic molybdenum and sulfur at 1600℃. 

It starts to be oxidized when heated at 315°C in the air, and the temperature rises and the oxidation reaction speeds up. Molybdenum disulfide is insoluble in water, dilute acid and concentrated sulfuric acid, generally insoluble in other acids, alkalis, and organic solvents, but soluble in aqua regia and boiling concentrated sulfuric acid. Slowly oxidized at 400 ℃ to generate molybdenum trioxide:

2MoS2+ 7 O2→ 2 MoO3　+ 4 SO2" can be used to test the molybdenum trioxide produced with a ferro-titanium reagent. First, the product is treated with sodium hydroxide or potassium hydroxide solution (the principle is to convert molybdenum trioxide into molybdate), and then the titanium iron reagent solution is added dropwise, which will react with the generated sodium or potassium molybdate to produce gold Yellow solution. This method is very sensitive, and trace amounts of molybdate can be detected. And if there is no molybdenum trioxide generated, the solution will not produce golden yellow, because molybdenum disulfide does not react with sodium hydroxide or potassium hydroxide solution.

Molybdenum disulfide can react with chlorine when heated to produce molybdenum pentachloride:

2 MoS2+ 7 Cl2→ 2 MoCl5+ 2 S2Cl2

Molybdenum disulfide and alkyl lithium react under control to form an intercalation compound (interlayer compound) LixMoS2. If it reacts with butyl lithium, then the product is LiMoS2.

Molybdenum disulfide has a high content of active sulfur, which is easy to cause corrosion to copper. It is discussed in many books and papers on lubricant additives. In addition, when the parts made of copper and its alloys need to be lubricated, it is not impossible to use molybdenum disulfide lubricating products, but also to add copper corrosion inhibitors.

Molybdenum disulfide is a good solid lubricating Chemicalbook material. It has excellent lubricity for equipment under the conditions of high temperature, low temperature, high load, high speed, chemical corrosion and modern ultra-vacuum;

The unique sandwich structure of molybdenum disulfide (MoS2) makes it have excellent lubrication, catalysis and other properties, and has great potential in friction, lubrication, catalysis and other fields. Based on the lubrication mechanism of molybdenum disulfide MoS2, the surface is modified. The current research status is reviewed, including surface organic coatings, precipitation reaction coatings, intercalation modification, etc.; and the current application fields of molybdenum disulfide, such as self-lubricating thin layers, intercalation batteries, and high-efficiency hydrogenation Desulfurization, catalysts, etc., and look forward to its future research directions.

Application of Molybdenum disulfide MoS2 friction modifier

Molybdenum disulfide MoS2 friction modifier is mainly used in lubricating oil and grease to improve its anti-wear, anti-friction and extreme pressure properties. Due to its excellent physical and chemical properties such as adjustable band gap, large specific surface area, rich edge sites, and good chemical stability, nano-molybdenum disulfide is used in the fields of optoelectronic devices, catalysis, lithium-ion batteries and supercapacitors, and has great lubrication Application value is one of the hotspots of continuous research.

Molybdenum disulfide is an important solid lubricant, especially suitable for high temperature and high pressure. It is also diamagnetic, can be used as a linear photoconductor and a semiconductor showing P-type or N-type conductivity, and has the functions of rectification and energy conversion. Molybdenum disulfide can also be used as a catalyst for the dehydrogenation of complex hydrocarbons.

It is also known as the "king of advanced solid lubricants." Molybdenum disulfide is a solid powder made by chemically purifying natural molybdenum concentrate and changing the molecular structure. The color of this product is black with silvery gray, metallic luster, slippery to the touch, and insoluble in water. The product has the advantages of good dispersibility and non-sticking. It can be added to various greases to form a non-sticky colloidal state, which can increase the lubricity and extreme pressure of the grease. It is also suitable for high-temperature, high-pressure, high-speed and high-load mechanical working conditions to extend the life of the equipment.

The main function of molybdenum disulfide used in friction materials is to reduce friction at low temperatures, increase friction at high temperatures, and have a small loss on ignition. It is volatile in friction materials.

Anti-friction: Molybdenum disulfide processed by supersonic jet pulverization has a particle size of 325-2500 mesh, micro-particle hardness of 1-1.5, and friction coefficient of 0.05-0.1, so it can reduce friction when used in friction materials;

Increase friction: Molybdenum disulfide is not conductive, and there are copolymers of molybdenum disulfide, molybdenum trisulfide and molybdenum trioxide. When the temperature of the friction material rises sharply due to friction, the molybdenum trioxide particles in the copolymer expand with the temperature, which plays a role in increasing friction;

Anti-oxidation: Molybdenum disulfide is obtained through chemical purification and comprehensive reaction. Its PH value is 7-8, which is slightly alkaline. It covers the surface of the friction material to protect other materials from oxidation, especially to make other materials not easy to fall off, and the adhesion force is enhanced;

In addition, molybdenum disulfide can also become a new material for making transistors. Compared with graphene, which is also a two-dimensional material, molybdenum disulfide has an energy band gap of 1.8 eV, while graphene does not have an energy band gap. Therefore, molybdenum disulfide may have a broad application space in the field of nano-transistors. Moreover, the electron mobility of a single-layer molybdenum disulfide transistor can reach up to about 500 cm^2/(V·s), and the current switching rate can reach 1×10^8.

Molybdenum disulfide MoS2 friction modifier price

The price of molybdenum disulfide MoS2 friction modifier will vary randomly according to factors such as production cost, transportation cost, international situation, and market supply and demand of the price of molybdenum disulfide MoS2 friction modifier. Tanki New Materials Co., Ltd. aims to help various industries and chemical wholesalers find high-quality, low-cost nanomaterials and chemicals by providing a full set of customized services. If you are looking for MoS2 friction modifier molybdenum disulfide price, please feel free to send an inquiry to get the latest price of MoS2 friction modifier molybdenum disulfide.

Molybdenum disulfide MoS2 friction modifier supplier

As a global supplier of molybdenum disulfide MoS2 friction modifiers, Tanki New Materials Co., Ltd. has extensive experience in the performance, application and cost-effective manufacturing of advanced and engineered materials. The company has successfully developed a series of powder materials (Nano-gold steel Stone Best engine oil additives, lithium stearate, nano-copper and nano-oil additives), high-purity targets, functional ceramics and structural devices, and provide OEM services.